
Your final inspection is the last step before your bond comes back, and most disputes come down to cleaning. The good news is that property managers in Sydney tend to check the same places every time. If you know where they look, you can make sure nothing is missed.
Use this checklist whether you clean yourself or book a professional. It follows the same order we use on every end of lease clean.
Before you start
- Find your ingoing condition report. The property only needs to be left in the condition it was in when you moved in, allowing for fair wear and tear. The report and your move-in photos are your evidence.
- Move everything out first. Cleaning an empty home is faster and nothing gets missed behind furniture.
- Keep power and water connected until the clean is finished. Lights, the oven and hot water are all needed.
Kitchen
The kitchen is where agents spend the most time, and the oven is the number one item on most exit reports.
- Oven inside and out, including racks, trays and the glass door
- Cooktop, knobs and the area behind the stove
- Rangehood, including the underside and the filters
- Inside and outside every cupboard and drawer
- Benchtops, splashback, sink and taps
- Dishwasher exterior, seals and filter
- Fridge space: wipe the floor and walls where the fridge stood
Bathrooms and toilets
- Shower screen descaled so the glass is clear, not cloudy
- Tiles and grout lines scrubbed, with no soap scum at the base
- Toilet inside, outside, under the rim and around the base
- Vanity inside and out, mirror streak-free
- Exhaust fan cover free of dust
- Taps and drains polished and clear of hair
Bedrooms and living areas
- Inside built-in wardrobes, shelves and sliding door tracks
- Skirting boards, doors and door frames
- Light switches and power points (agents often run a finger over these)
- Window glass inside, frames, sills and tracks
- Ceiling fans, air-conditioner vents and cobwebs in corners
- Carpets vacuumed, hard floors mopped
Laundry
- Laundry tub, taps and splashback
- Inside cupboards
- Behind and under the dryer and washing machine spaces
- Dryer lint area
Outside and extras
- Balcony or courtyard swept, glass balustrades wiped
- Garage swept and cobwebs removed
- Bins empty and clean
- Carpets steam cleaned, if your lease asks for it
- Pest or flea treatment, if you had pets and your lease requires it
The five things agents flag most often
- Oven and rangehood grease. Built-up grease is easy to spot and slow to remove.
- Shower screen scale. Cloudy glass looks dirty even after a wipe.
- Window and door tracks. Dust and dead insects collect here and are often forgotten.
- Dusty skirting boards and switches. A quick touch test shows up dust straight away.
- Marks on walls. Light scuffs can often be spot cleaned; larger marks may need touch-up paint.
DIY or professional?
A thorough end of lease clean on a two-bedroom apartment can take one person most of a day, and it usually happens in the middle of a move. A professional team brings the right products and equipment, works to the agent's checklist, and comes back free of charge if anything is flagged. You can see exactly what's covered on our comparison page and get a fixed price in under a minute with the instant quote.
Frequently asked questions
How long does an end of lease clean take?
It depends on the size and condition of the home. A one or two-bedroom apartment is usually finished in a few hours by a professional team.
Do I have to steam clean the carpets?
Check your lease. Many Sydney leases ask for professional carpet cleaning at the end of a tenancy, especially if you had pets.
